Author Archives: Evan

75% of Homeowners Want Granite for Their Next Kitchen Remodeling

Published by:

A new survey conducted by Harris Interactive on behalf of the Marble Institute of America went out in search of answers about the public opinion of granite countertops. The results are staggering; American homeowners consistently approve of granite countertops in both their aesthetics and their utility.

Over 1,500 homeowners were surveyed online with a focus on those who are intending to remodel their kitchens in the next few years. Of those surveyed, three fourths stated that they want granite countertops, and a slightly higher percent agreed with given positive statements about granite countertops. Consumers widely agreed that “nothing beats the beauty and value of granite countertops.”

Marble Institute member G.K. Naquin stated, “The survey shows what our customers tell us: no matter what the economy looks like, homeowners recognize that granite countertops enhance the value of their homes.” Naquin himself works for Stone Interiors in Loxley, Alabama—a company that sells granite in many forms, including countertops. “Consumers who are remodeling their kitchens see granite countertops as a safe investment in their homes. They prefer this natural stone to other materials because they understand it pays for itself in terms of higher resale value.”

Part of the survey involved rating countertop materials against each other. The metric by which they were measured was by home value increase; granite was voted better than its competitors by three-to-one. The runner-ups were solid surface materials (e.g. Corian®) at second, and manufactured stone products like Silestone and Caesarstone at third.

Homeowners were asked whether or not they agreed with statements about the quality of the material, and the overwhelming majority spoke positively about multiple aspects of granite countertops.

• 93% stated that granite countertops are an attractive addition to any home
• 91% agreed that granite countertops are strong and long-lasting
• 89% agreed that granite countertops pose no safety risks

Furthermore, 93% of the homeowners that are remodeling their kitchen in the next couple of years said that granite countertops are safe; their opinions are corroborated by recent scientific studies investigating the safety of granite countertops.

The latest of these studies was done by the independent laboratory Environmental Health & Engineering Inc. (EH&E). EH&E sought to investigate whether or not these countertops were a significant source of radon in households, as this was the chief concern about the danger of granite in households. They found conclusive results stating that 99.95% of all countertops produce less radon than can be found outside in the United States. In normal usage, granite countertops can transmit no level of radon concentration that would require remediation by the guidelines set forth by the U.S. Environmental Protection Agency (4 picocuries/liter).

“The most typical granite countertop installations would produce radon concentrations in the home that are 10,000 times lower than the EPA action level, and are so low they are not even measurable,” concluded the head of EH&E Dr. Joseph Allen. For granite countertops to produce the level of radon considered dangerous by the EPA, 13% of the home would have to be covered in the substance. 

The statistical model created in the study by EH&E leaves the chances at one in one million. 

The CEO of the Marble Institute of America, Gary Distelhorst, was outspoken about the safety concerns of consumers. “Natural stone like granite has been used in homes for thousands of years and now that new technology has reduced the cost of producing and shipping it around the world, more homeowners are embracing the beauty, durability and safety of granite countertops.”

Distelhorst had commissioned the survey, confirming the MIA’s beliefs on customer opinion. “Independent consumer surveys have consistently shown that Americans love the natural look of granite and value it above other countertop products.” Compared to other similar styles of countertop, granite has a persistent classical feeling in many different kinds of kitchens. As home designers approach 2020, consumers voting (both in surveys and with their wallets) agree that granite manages to shine even in modern kitchens.

The survey itself was demographically and geographically focused as well, taking care to measure the backgrounds of consumers. Those who have graduated from college and those in higher income brackets spoke highly of granite countertops, voting that they preferred granite over other materials. Households that had greater than four members heavily preferred granite. 87% of those measured from these demographics agreed that they desire granite for their next kitchen remodeling venture.

This survey is the second major project to show the opinions of consumers on granite. In 2008, a study conducted via Harris Interactive’s QuickQuerySM service showed that 55% of prospective buyers wanted granite countertops in what they described as their “dream kitchens.” That study measured adults 18 and older.

Buying The Right Framing Nailers

Published by:

If you’re looking for an equipment that is quick, framing and for a construction project, then framing nailers are the right tool for you. Framing nailers are designed to fasten mounted in long strips in a paper or plastic carrier. Some Framing nailers are used for pallet making and roofing. It might be handy but, I advise you to be careful in using one since it is hazardous especially with improper use. For the safety of the users, framing nailers or nail guns have a muzzle that contacts the target. Before choosing a framing nailer let’s identify them first.

Nailers can be divided into five categories. The first one is the Pneumatic nail gun. It is the most popular type. The power of this nail gun comes from a compressed air supply.

The second type of nail gun is the powder-actuated nail gun. From its name, powder-actuated nail gun uses gas pressure to make it work. It can be subdivided into two: the direct drive and indirect drive. The direct drive uses gas pressure directly to the nail, while Indirect dive uses the gas pressure that acts on a heavy piston which drives nails. Each type can be used with the right cartridge loads, can be powerful drives nails and fasten nails into concretes and hard objects.

Next is, the combustion power gun. Like powder-actuated, combustion is also powered by a gas plus a small air explosion. Next is the electric nail gun, this nail gun has rotation electric motor that gradually compresses a nail and releases it.

Lastly, is the Solenoid-powdered nail gun. In this kind of nail gun, which has a long rod which drives usually drives the nail to the surface.

Now that you checked the different kinds of nail guns, let’s check some of the best framing nailers.

First is the Paslode lithium Ion Cordless framing nailer. This kind of framing nailer does not need any compressor plus its light portable and easy to use.

Next is the Freeman PFR2190. This kind of framing nailer is ideal for framing, wall sheathing, sliding installation, subfloors and much more. The triggers can also be interchangeable for single or contact firing.

So, there you have it. There are a lot of framing nailers to choose from. I hope that this post will help you choose the right nailer for you. So, good luck!

6 Mistakes to Avoid When Installing Kitchen Cabinets

Published by:

In a kitchen renovation, one of the causes for the delay is installing your kitchen cabinets. DIY kitchen cabinets in San Diego are easy to assemble and install, but that does not mean it’s uncomplicated. Sometimes you see something’s wrong when all of them have been put in place. There are common errors that people make in the process. Read on so you can avoid the same when you install yours.

  1. Incorrect measurement. Installing San Diego kitchen cabinets is an exact science. You have a space for your cabinets, sinks, and appliances. If your measurements are off, then you will be in trouble. You need to know the precise measurements of your cabinet sections. You don’t want your kitchen to look awkward. Or worse, you will spend more in buying new cabinets. Take into consideration the measurements of your sink and other kitchen appliances to ensure your cabinets will fit in the space provided.
  2. Informal design layouts. You should get a professional design layout. You can get this for free when you purchase your kitchen cabinets in San Diego, such as in City Cabinet Center. They have experts who can help you choose the style, along with the sizing for upper and lower cabinets.
  3. Not checking out the cabinets when they arrive. Inspect the goods when they get delivered. Mistakes are unavoidable. Check the boxes to make sure they are the correct size, including the knobs, screws, etc. You might go ahead and install all of them only to find out that something is missing, or it was not of the size that you ordered.
  4. Lighting and plumbing goes before cabinet installation. Under-cabinet lighting is a lot easier and less expensive when your electrician does his work before your cabinets are installed. Same with plumbing. Dishwashers, trash compactors, refrigerators, sinks, faucets, etc. will need to be taken into account before cabinet installation. Think about whether you will need additional plumbing done – like water filters, garbage disposals – which you might have a hard time adding once your cabinets are in.
  5. Correct cabinet door direction. Ensure your cabinet doors do not interfere with anything else. Often your stove doors do not clear the cabinet after the handles are put in because a spacer was not used. Spacers provide clearance for handles. City Cabinet Center can provide you spacers with the same color and finish as your cabinets.
  6. Installing them yourself. Doing it on your own is really not a good idea. Another person can help you hasten the process, and can also verify if your measurement is accurate. He can also ensure your safety by being on a lookout for possible accidents. You will also need someone to hold the cabinet while you screw it in, or hold the ladder while you’re installing a top shelf. If an unfortunate accident happens, then someone can immediately call for help.

You need to be an experienced do-it-yourselfer if you want to install kitchen cabinets on your own. But why go through all the hassle and stress when you can hire an expert in San Diego kitchen cabinets like CITY CABINET CENTER can provide? Cabinet installation is a precision game. Nothing looks worse than an awkward kitchen because of lopsided cabinets.

Why Prefer a Custom Glass Shower Door?

Published by:

Are you considering custom shower stalls for your bathroom? You have many options when looking for custom shower doors. You may find that you need to specially order shower doors because you can’t find the right shower door for your bathroom. Here are a few reasons why you may want a custom glass shower door over the ones you find in the market.

Unique Situation

In some cases, custom shower stalls are recommended over regular shower stalls because you have a unique situation. You may want something that you just can’t find in the regular market and you want your bathroom to have a unique design. In this case, you need a professional that can design a custom shower door for your bathroom and install the right shower stall for your needs. A professional can come in and have a look at your bathroom and then provide you with several options. Most contractors will have special order shower doors that they can get for you so you have something that meets your current needs.

Different Measurements

Your bathroom may have some unique measurements that a regular glass shower stall won’t conform to. You may need to have some custom glass cut to fit your area so that everything fits. A contractor can cut the glass to meet individual needs so you have something that looks attractive and fits in the space you have. The custom glass work in many cases can look at lot neater and professional, than a regular setup would.

More Options

When looking for custom shower doors that are frameless, you have a lot more options to draw upon. A contractor can come up with many different designs and styles for you to choose from so you can pick something that works for you. If you need a unique shape, the contractor can design it for you or send away for special order shower doors to meet your needs. You can have doors that have those unique shapes that you want to compliment the look and feel of your bathroom. For example, you can have frameless steam enclosures, neo-angle enclosures, right-angle encloses and many more options available to you when you have custom work done. You can also pick different glass options such as frosted, colored, or ones with a pattern that might not be available at your local store.

More Control Over Everything

When you go for a custom shower door, you have more control over the entire process. You can pick all the options you need and work with the professional to find something that is unique. You won’t be stressed out because you’ll have a lot more options to choose from and would find just the right shower door.

Conclusion

In many cases, you’ll find that custom shower stalls are going to be a better option when you remodel your bathroom. You can hire a professional to ensure that everything fit the right way and that you find just the right shower stall for your needs and within your budget.

How To Resurface Your Concrete Driveway So It Lasts Longer?

Published by:

Over time, concrete driveways tend to develop potholes and cracks. Out of all the options that are available, it is often the most cost-effective and sensible to resurface a driveway’s damaged sections. Resurfacing is a solid home improvement option that can save you a lot of money, improve the landscape’s visual appeal and take less time when compared with other methods that are available.

Steps for resurfacing concrete driveways

When a concrete driveway is compared to a gravel driveway, it appears that although a concrete drive can last for approximately 20 to 30 years, gravel driveways can last up to 100 years and require only a minimum amount of maintenance. However, concrete is still the preferred option, especially if you choose the right contractor to do your driveway.

These days it is a very common sight to see your driveway, which not that long ago was a beautiful, smooth concrete drive, now be wrecked, potholed and cracked. It is definitely not a sight that you want to see. Atmospheric factors, rain and extreme temperatures subject concrete driveways to a great deal of wear and tear.

To begin with, there is the option for you to reconstruct your whole driveway. However, that will be very expensive. You can instead repair only the damaged parts of your driveway, and save yourself a lot of money in the process. That is definitely a better options. Resurfacing or repairing your concrete driveway will potentially save you as much as 50% of the total cost for entirely reconstructing your driveway.

Resurface Your Concrete Driveway

Repairing Your Concrete Driveway

The first step in your repairing process is to thoroughly clean the concrete surface. If necessary, use a firm brush to sweep the area. After you are done sweeping, use a strong hose that has enough water pressure and then spray water into the holes and cracks to loosen debris and get rid of all of the dirt and dust.

After you sweep and spray clean, you then need to repair whatever cracks have developed. You need to prime the cracks and then use elastomeric repair material to fill them. The cracks can then be further reinforced with fabric and an elastomeric base coat can be applied over the cracked area. Multiple polymer concrete patches then need to be laid onto the cracked surface. The patches are then ground in order to make them smooth and also level with the surface surrounding them.

Resurfacing A Concrete Driveway

A granule broadcast and prime coat are evenly applied over the whole area that needs to be resurfaced. Then a texture coat gets applied to the whole area. To achieve this, first ultra surface polymer concrete gets prepared according to the directions that are listed on the package. Then a special kind of spray gun is used to evenly spray it onto the concrete surface.

After you have finished the resurfacing process, it is critical to ensure that the layers are properly evened out. Therefore, it is necessary to use a trowel to level and smooth the surface. Be sure to wear footwear and hand gloves while doing this so you don’t end up stuck to the concrete.

If you would like to have a colored driveway, during the resurfacing process you can apply a color coat onto the surface. Then applying a seal coat layer and allow it to dry thoroughly.

Remember that your driveway should not be made accessible to cars for 2 to 3 days after it has completely dried. Before you plan to resurface your driveway, consider the weather conditions first. Suitable conditions for resurfacing your driveway include a damp surface and 70 degrees F. In cold weather, the curing process will take longer. When the weather it hot, you will need to dampen the surface regularly in order to slow the process down.

It can be a time-consuming and physically demanding task to resurface your concrete driveway. If you think it is beyond what your limits are, it is always possible to hire a professional concrete contractor to complete the job instead.

Save