Category Archives: Home Maintenance

Buying The Right Framing Nailers

Published by:

If you’re looking for an equipment that is quick, framing and for a construction project, then framing nailers are the right tool for you. Framing nailers are designed to fasten mounted in long strips in a paper or plastic carrier. Some Framing nailers are used for pallet making and roofing. It might be handy but, I advise you to be careful in using one since it is hazardous especially with improper use. For the safety of the users, framing nailers or nail guns have a muzzle that contacts the target. Before choosing a framing nailer let’s identify them first.

Nailers can be divided into five categories. The first one is the Pneumatic nail gun. It is the most popular type. The power of this nail gun comes from a compressed air supply.

The second type of nail gun is the powder-actuated nail gun. From its name, powder-actuated nail gun uses gas pressure to make it work. It can be subdivided into two: the direct drive and indirect drive. The direct drive uses gas pressure directly to the nail, while Indirect dive uses the gas pressure that acts on a heavy piston which drives nails. Each type can be used with the right cartridge loads, can be powerful drives nails and fasten nails into concretes and hard objects.

Next is, the combustion power gun. Like powder-actuated, combustion is also powered by a gas plus a small air explosion. Next is the electric nail gun, this nail gun has rotation electric motor that gradually compresses a nail and releases it.

Lastly, is the Solenoid-powdered nail gun. In this kind of nail gun, which has a long rod which drives usually drives the nail to the surface.

Now that you checked the different kinds of nail guns, let’s check some of the best framing nailers.

First is the Paslode lithium Ion Cordless framing nailer. This kind of framing nailer does not need any compressor plus its light portable and easy to use.

Next is the Freeman PFR2190. This kind of framing nailer is ideal for framing, wall sheathing, sliding installation, subfloors and much more. The triggers can also be interchangeable for single or contact firing.

So, there you have it. There are a lot of framing nailers to choose from. I hope that this post will help you choose the right nailer for you. So, good luck!

Staying Cool: Extending the Lifespan of Your HVAC System

Published by:

It’s an unseasonably hot day. Your family is encouraging you to turn on your home’s central air conditioning system, and finally you give in. Except when you switch your AC on, nothing happens. When your home heating or cooling system breaks unexpectedly, it can result in high repair costs and anxiety about your budget. Thankfully, there are a number of things you can do as a homeowner to avoid the unfortunate scenario of unexpected repairs and extend the life of your HVAC system. Here are four suggestions.

Follow the Manufacturer’s Maintenance Schedule

Do you still have the paperwork for your home heating and cooling system? If so, it’s a good idea to read through it. Many manufacturers will provide a checklist of simple things you can do as a homeowner to maintain your HVAC system. Things like checking vents regularly and replacing filters every six months may be on the list of suggestions from the manufacturer. These tasks are relatively simple and inexpensive, but they can make a big difference on how well your system continues to function over time.

HVAC system

Improve Air Flow in Your Home

Did you know that simple things like closing doors and blocking vents with furniture can actually put stress on your home’s heating and cooling units? These common issues can create additional pressure in your home’s ductwork, and force your system to work harder to heat and cool your home. To help alleviate the stress on your system, consider keeping doors open and moving furniture around to improve air flow in your home. It’s also a good idea to inspect vents regularly and remove any dirt or dust which has accumulated over time.

Keep Outdoor Units Clear

Do you have a central air conditioning unit that is located outside of your home? Keeping outdoor units free of leaves and other debris can help keep them running for the long term. Make it a point to check your central AC system every few months to ensure that the coils and fan are clean and clear of obstructions. This can help you avoid any unexpected issues with your central air conditioner.

Have your System Serviced Regularly

Even if you are following the maintenance checklist provided by your system manufacturer, it is also a good idea to have your heating and cooling units serviced by a contractor on a routine basis. Professional HVAC contractors will be able to perform more comprehensive maintenance tasks in order to preserve the integrity of your heating and cooling units. Routine system tune ups by a professional can add years to the life of your HVAC system. Investing in maintenance contract to protect your system is well worth the cost.

Keeping your HVAC system running for the long haul may be easier than you think. Start by reviewing the paperwork from your system manufacturer for suggested maintenance, improve the air flow in your home, keep outdoor central air systems free of leaves and dirt, and schedule regular service for your system. These simply steps can help you avoid any unexpected – and potentially expensive – heating and cooling system repairs.

Tips for Preparing Your Climate Control Unit for Winter

Published by:

With winter right around the corner, it is easy to predict a drop in temperatures. The other occurrence that happens every winter is the fact that your electric bill will increase significantly. Most of the time, the increase has to do with your climate control system. While it is possible to contact a professional company, such as GNRCorbus, there are some ways that you can prepare your unit on your own. In this guide, you will find some basic information for getting your unit prepared for the incoming cold weather.

Close Inspection

Since there is usually a cooling off period, between summer and winter, you probably haven’t run your HVAC unit in quite some time. Therefore, you will definitely want to give the unit a good, close inspection, before it is too late. While some units can last over twenty years, many go bad way before this time. Therefore, you should run the unit and listen to it careful. Obviously, if the unit doesn’t kick on right away, you’re already facing a problem. If you manage to get the unit running, you should listen carefully and try to figure out whether or not it is working properly. Be sure to make sure that the unit’s heating function is turned on and that warm air is being blown into the house.
1Cleaning or Replacing the Filter

If you’re lucky, your unit will be running perfectly. If this is the case, you will still want to continue inspecting the other areas of your HVAC system. For instance, the filter is also very important. This item should be located somewhere inside of your home. You will probably need to remove a grill, in order to access your filter. How dirty is it? In most cases, you will want to go ahead and clean it or replace it anyway. The way to handle the situation will depend on the type of filter you have.
2Thermostat Upgrade

Whether or not you know it, thermostats are upgraded and enhanced often. Therefore, there is always a possibility that your thermostat might be outdated. If you have a thermostat that is controlled by a plastic lever, you will definitely want to look into an upgrade. Remember that old thermostats are actually unreliable and usually inaccurate. Using one of them can actually make your electric bill more expensive. Therefore, you should definitely consider checking out and upgrading immediately.
An air conditioning tech working on a heat recovery unit.Checking your Ducts

After you’ve finished checking the items above, you will want to get to your duct, which could be in your attic or under your floor. Remember that you might get dusty and dirty during this process. However, it is crucial to ensure that you’re not losing air along the way. Be sure to have the unit turned on and feel around the entire duct. If you feel air escaping, it is possible that you’ve got a leak. While you might be able to repair the problem with some tape, you might have to replace a portion of the duct, which would likely require a professional.

How to Prevent Rust on Your Patio Furniture and Grills

Published by:

Rust can damage most of your valuables from barbecues and patio furniture to your lawn and garden tools, rain gutters, steel window, downspouts and handrails. Apart from the fact that rust looks ugly, leaving it on your valuables will result to more damage.

For instance, rain gutters with rusted joints can cause leakage and water will run on the wood trim at roofline or along the wood siding thus resulting to costly damage due to rotting. Having rusts is also a safety concern such as when it affects the screw on your handrail or a leg of your garden chair, which may lead to a guest’s nasty fall. Outdoor power tools when rust-savaged can predispose their operator to danger. A rusted bolt may become a projectile and could hurt you or anyone who is in the vicinity.

The two most common types of finishes to protect the surface of metals are paint and oil, which are effective in preventing the damage coming from oxygen and water.

High quality primers are necessary to begin an excellent paint job. This means that you should use a metal-specific primer. Paints also contain pigments like iron oxide and zinc that when used would make them efficient because they adhere to the metal more effectively. No matter what primer you are going to use, you should select a topcoat compatible to the primer. Generally, oil based paints are compatible with oil based primers. It is best to use this tandem because it offers the excellent protection against weather and abrasion.

However, there is an exception to the oil-based tandem rule. With this in mind, it is best to consider the layout of downspouts and gutters. Certain flaws like joints and dents are best covered by acrylic, water-based coat which result to a low sheen. In addition, gutters and downspouts are generally not easy to gain access to so oil-based paint are not required.

Equipment like fireplaces, heaters, furnaces, grills and wood or coal stoves produce heat that goes beyond 200 degrees. It is important that they are coated with high-heat resisting enamel paint designed specifically to finish items that become too hot. Be aware that most paints produce harmless odor especially the first time they are subjected to heat.

Ideally, only a high quality primer and oil-based coat are necessary. You can use roller, paint pad, sprayer or brush to apply the primer and finishing coat.

If you are going to use a brush, make sure that it is a natural-bristle brush. Those synthetically designed brushes such as the ones that are made from polyester or nylon work best with latex paints but they are too stiff when used for oil-based coats. This often leaves brush marks and loose bristles on the finished product.

There are a number of advantages when you use spray paints that have the canned aerosol spray paint or DIY spray rig. This method of painting is great for intricate details and often leaves a smoother finish. However, you need to practice the necessary precaution when using spray paints including:

  • Using protective gear like respirator and eye protector. Do not use the spray paint when there is sparks and flames can ignite the flammable vapors.

  • Cover the surroundings with canvas, plastic or paper to prevent overspray damage. You should never do a spray paint job during windy days unless you want your neighbor’s car to get painted as well.

  • If you utilize the spray rig, you should consider using a tip that complements the paint so you can prevent too much paint application. There are various sizes for tips depending on the kind of paint used like water based, oil based and lacquer, just to name a few.

  • Do apply a number of thin coats to avoid paint runs instead of using one heavy coat.

Preventing metal surfaces from getting rusty using paint is effective. But if the paint gets scratched and chipped, it will oxidize over time and its components that acts as rust barrier weaken. Eventually, the metal surface will get in touch with moisture thus resulting to rusting. If you want to lengthen the efficiency of paint jobs and your metal equipment, regularly check chipped and scratched areas on your paint and do a retouch.

Contributor Profile: Written in behalf of Aucom.com.au – Australia’s top provider of home and business type security cameras and cctv cameras.

Repair or Replace: What Makes Sense for Your HVAC System?

Published by:

Whether you’re a new homeowner or you’ve owned your property for decades, it’s important that your home’s systems are operating optimally. This is especially true when it comes to your heat and air conditioning units. After all, your HVAC system is what keeps you feeling comfortable in your home when the temperatures outside climb into the triple digits or dip below freezing. If you’ve recently noticed that your system isn’t heating or cooling your home optimally, you may be wondering whether to repair or replace it. Here are four factors to consider when making your decision.

Age of the System
One of the most important considerations for homeowners thinking about replacing their heating or air conditioning system is its age. According to HVAC professionals, most heating systems last about twenty years before needing replacement. Typically, central air systems have a shelf life of about 10-15 years. If your heating or air conditioning unit is older and not functioning well, it may be time to think about replacement.

hvac_install_filter

Energy Bills
A look at your past energy bills can be telling. Usually, if your heating or cooling system is having a problem, you’ll notice a significant spike in your monthly utility costs. For many homeowners, an increase in home energy costs is a clear indication that it’s time to call in a professional to assess the condition of their system. If you’ve noticed recently that your home heating and cooling bills are higher, schedule an appointment with a reliable HVAC contractor.

System Condition
Taking into account the condition of your system is just as important as considering its age. Your heating system could be only ten years old, but if it hasn’t been maintained properly it may need replacement. If your HVAC system has never been serviced and is not functioning well, ongoing maintenance costs could actually end up being more expensive than a full system replacement. If you aren’t already having your system tuned up regularly, consider making an appointment with a professional to help keep it running for the long term.

Noise Level
Some homeowners are plagued by their noisy central air conditioning or heating units. Sometimes people lose sleep because of the noise or are unable to enjoy spending time in their yard without interruption. If your heat or central AC system is older and the noise is having a negative effect on your life, it may be time for replacement.

It can be difficult for the average homeowner to determine whether or not their home’s heating or air conditioning system needs to be repaired or replaced. There are a number of factors to consider, including age of the system, monthly energy bills, system condition, and noise level. If you’ve noticed recently that your system is not functioning optimally, you may want to consider contacting a heating or cooling contractor to assess its condition. A professional can provide a helpful recommendation on whether it makes more sense to repair or replace your system.